RAE Chlorinated Rubber Paint

RAE’s Low VOC Chlorinated Rubber is an oil based alkyd traffic marking paint made with real rubber for better film builds and superior wear resistance. Best for use over concrete or for restriping paint lines. Low VOC for compliance in US States with marking paint regulations for < 100 g/l VOC Formulated for application using Brush, Spray, or Roll.

Data Sheets

This low VOC chlorinated rubber marking paint delivers reliable performance for both indoor and outdoor applications. Widely trusted by contractors, municipalities, and maintenance crews, it ensures high-visibility, professional-grade results. Take your traffic marking project to the next level with durable, reusable stencils and templates designed for professional results.

Directions

✔ Before application, stir thoroughly—do not mix with gasoline or oil. Clean tools using acetone or toluene, and always follow proper disposal procedures.

✔ It dries in just 10 to 20 minutes for foot traffic and 30 to 40 minutes for vehicles. Apply in temperatures between 40°F and 90°F. For optimal performance, use a wet film thickness of 12–15 mils. One gallon covers approximately 90 square feet, and twenty gallons can stripe a continuous 4-inch-wide line for a full mile.

✔ Choose this low VOC chlorinated rubber paint for safe, durable, and regulation-compliant striping that stands the test of time.

Maximize your efficiency and achieve sharp, consistent lines with high-quality line striping equipment built for serious pavement marking.

Prefer Thermoplastic Markings instead? Check out our category for different solutions. Also consider exploring our selection of Paint additives and aggregates to incorporate more traction, high-friction, visibility, and more.