Preformed Thermoplastic 24″ Rolls

SKU: 3516 | 3915 | 3517 | 3916 | 4221 | 4470 | 4220 | 4471 | 4223 | 4472 | 4222 | 4473
The Preformed Thermoplastic Pavement Marking Rolls 24″ x 30′ (60 Sq. Ft Per Pack) are a reliable and long-lasting solution for high-traffic roadway, intersection, and parking lot applications. Available in white, yellow, blue, red , black, and bike lane green.

Shop at

For group orders or questions, contact us at sales@raeproducts.net or 708-396-1984.

Additional Information

Our 24 inch wide preformed thermoplastic rolls are easy to unbox and lay out to form a long line, box, or zone stripes. These 24 inch rolls are also available in lines.

All our preformed thermoplastic pavement marking materials combine the convenience of pre-cut and easy-to-install torch down markings with the performance qualities of hot applied kettle-melt thermoplastic.

Engineered for enhanced visibility during both day and night, our preformed thermoplastic pavement markings are made with Swarco’s brilliant glass beads which are distributed throughout the material during the manufacturing process. With installation using just a propane torch, thermoplastic stop-bars to bike symbols have never been so easy to install. The 24 inch rolls are sold individually.

Prefer Traffic Marking Paint instead? Check out our category for different solutions, and pair it with our selection of Paint additives and aggregates to incorporate more traction, high-friction, visibility, and more. Take your traffic marking project to the next level with durable, reusable stencils and templates designed for professional results.

Frequently Asked Questions
Q: What is preformed thermoplastic?
A: It’s a durable pavement marking material that comes in ready-to-apply sheets or shapes, activated by heat for easy installation.
Q: What surfaces can it be applied to?
A: It adheres best to asphalt. For concrete or old surfaces, a primer is recommended to ensure strong bonding.
Q: What tools do I need for installation?
A: You’ll need a propane torch, safety gear, and a clean, dry surface. A heat gun may be used for smaller applications.
Q: How long before traffic can drive over it?
A: The surface is ready for traffic as soon as the material cools, typically within 5–10 minutes after installation.
Q: How should I store unused pieces?
A: Store flat in a dry area, away from direct sunlight and moisture. Avoid bending or folding to prevent cracking.

Additional information

Sizes90 MIL, 125 MIL
Rolls per pack1 roll
Linear ft. per pack30 ft.
Sq. ft. per pack60 ft.
White90 MIL – 3516
125 MIL – 3915
Yellow90 MIL – 3517
125 MIL – 3916
Blue90 MIL – 4221
125 MIL – 4470
Red90 MIL – 4220
125 MIL – 4471
Black90 MIL – 4223
125 MIL – 4472
Bike Green90 MIL – 4222
125 MIL – 4473
ColorBike Green, Black, Blue, Red, White, Yellow