For Product SALES & SERVICE please call 1-708-396-1984 or email us at sales@raeproducts.net
FloroBuild Epoxy Mortar Systems
Protect new concrete with a heavy-duty, long lasting wear layer. Resurface existing slabs to impart new life into cracked, spalled or pitted floors.
- Outstanding Compressive Strength
- Excellent Impact and Abrasion Resistance
- Contributes to LEED® Green Building Credits
- USDA/FDA, EPA, OSHA and ADA Compliant
- Options in Floor Slope, Drain, Integral Cove Base
- Choice of Colors, Topcoats, Slip-Resistance
- Very Economical Cost per Mil
- Impressive Life Cycle Value
FloroBuild HT/PT – Hand Troweled/ Power Troweled Epoxy Mortar
Industrial grade 100% solids epoxy with special graded aggregate provides compressive strength up to 3X greater than concrete alone. Handles easily to create integral 45 degree cant coves or standard 4.0 to 12.0 inch high (10.16 to 30.48 cm high) radial coves, and may be used as deep fill during substrate preparation. Optional smooth or stipple-textured, high performance grout coats, topcoats and slip-resistance. Typically installed at thickness of 3/16 inch to 1/4 inch (4.8 mm to 6.0 mm) or greater.
FloroBuild XT – Extra Tough Epoxy Mortar
A proprietary mortar of graded steel and natural aggregate, blended with our industrial grade epoxy, provides more than 4X the compressive strength of concrete alone – one of the best performing options available. Furnishes tremendous abrasion and impact resistance in the harshest of environments. Optional smooth or stipple-textured, high performance grout coats, topcoats and slip-resistance. Typically installed at thickness of 3/16 inch to 1/4 inch (4.8 mm to 6.0 mm) or greater.