RAE’s Cinder Block Paint is a high performance, 100% acrylic latex, water-based paint & primer for interior and exterior above grade cinder block, concrete, stucco, brick, and other masonry surfaces. Cinder Block Paint has better hiding than regular paints, so it seals fills, and conditions porous masonry substrates better. This paint can be used as a primer under latex and waterborne alkyd topcoats.
Application
Shake/Stir all containers thoroughly before using. Paint only in dry weather. Thinning is not normally required, but a small amount of water may be added if need. Addition of water may slow dry time. Recommended application conditions: 50°F minimum and 90°F maximum. Apply at least 5°F above dew point with a relative humidity below 85%.
A Safer Paint Choice
RAE Paints has been committed to helping the environment by producing low VOC paints and products that exceed the most stringent air quality standards. Our concern for the environment is matched with our focus on producing the best quality and most durable paints available.
This means that you are not only using some of the best paint available, it is also some of the most environmentally friendly as well.
Browse our Cinder Block Paints at our RAE PROSTORES