RAE Fast Dry Latex Paint

SKU: 6510 | 6511
RAE’s Fast Dry 100% Acrylic Latex Marking Paint is designed for air or airless spraying over new sealcoat and asphalt surfaces. Can also be used over concrete or brick. Indoor & Outdoor uses include: parking lots, edge lines, zone marking, stencil painting, and more.

Shop at

Buy Now
Product Literature
📊📘 Premium Traffic & Zone Marking Paint Catalogs

For group orders or questions, contact us at sales@raeproducts.net or 708-396-1984.

Additional Information

RAE’s Regular Dry Traffic Marking Paint is a 100% Acrylic Latex Pavement Striping Paint is 100% latex acrylic (waterborne traffic marking paint), intended for parking lot line striping paint applications where fast dry times are not necessary. Use on concrete, asphalt, and brick. Exterior and Interior. This durable traffic paint for roads is considered a good product for use over freshly applied sealcoat or asphalt that is less than one year old. It is not recommended for restriping of previously striped lines or for use in snow-belt areas where heavy salting takes place. Available in Yellow, White, Blue, Red, and Black.

Safety Data Sheet (SDS) 📁4928 Black – Safety Data Sheet
📁4909 Red – Safety Data Sheet
📁3905 Blue – Safety Data Sheet
📁4902 Yellow – Safety Data Sheet
📁4907 White – Safety Data Sheet
Product Data Sheet (PDS) 📁4928 Black – Product Data Sheet
📁4909 Red – Product Data Sheet
📁3905 Blue – Product Data Sheet
📁4902 Yellow – Product Data Sheet
📁4907 White – Product Data Sheet

Additionally, this 100% acrylic latex commercial traffic marking paint is well-suited for newer asphalt or sealcoat surfaces less than a year old. It’s ideal for low-traffic areas or warmer regions where de-icing salts are not typically used. The paint delivers consistent coverage, vibrant color, and dependable results for everyday pavement striping paint jobs. Take your traffic marking project to the next level with durable, reusable stencils and templates designed for professional results.

Application Tips:
Do not add gasoline or oil.
Use clean equipment and filter before use.
For best performance, paint only in dry conditions.
Always comply with federal, state, and local disposal regulations.

Maximize your efficiency and achieve sharp, consistent lines with high-quality line striping equipment built for serious pavement marking. Choose from solvent-based pavement paint or quick-dry traffic paint formulas for your needs.

Prefer Thermoplastic Markings instead? Check out our category for different solutions. Also consider exploring our selection of Paint additives and aggregates to incorporate more traction, high-friction, visibility, and more—including reflective road marking paint for enhanced safety.

Frequently Asked Questions
Q: What surfaces can Traffic Marking Paint be applied to?
A: It can be applied to asphalt, concrete, and previously painted surfaces. Surface cleaning is essential for proper adhesion.
Q: Is this paint weather- and traffic-resistant?
A: Yes, it’s designed to withstand vehicle wear, rain, sunlight, and temperature changes for lasting visibility.
Q: How fast does it dry?
A: Dry time depends on the product and conditions but usually ranges from 10 to 30 minutes. Some formulas support quick return to traffic.
Q: Can I use glass beads with this paint?
A: Yes. Drop-on glass beads can be applied to enhance nighttime reflectivity and safety.
Q: How should I store leftover paint?
A: Keep containers tightly closed and store in a cool, dry place away from direct heat or flame.

Additional information

ColorWhite, Yellow
Paint Sizetote (250 gallon), 5 U.S. gallons, 55 gallon
Viscosity80-90 Ku
Total Solids65% minimum
VOC (minus water)119 g/liter, 0.99 lb./gal.
Traffic Paint BrandRAE Paint